Saia® linear motor series have enhanced design features and improved performance.
Available in 3 sizes.
Available in strokes up to 150mm
Force up to 60N
Allow push and pull operation
Motor maintains position even when power is switched off
Use the selection overview chart to determine which size offers the desired performance and mechanical specifications. Please refer to the individual specification pages for complete performance and mechanical data.
Specified data for torque values is valid for:
Specified maximum values and overloading is not permissible
Duty cycle based on 5 Minute cycle time
an ambient temperature of 23 ±5¡C
Max. load torque must be lower than specified
At rated voltage
Cold Motor
Step width tolerance is usually about ±5%. The failure is not cumulative.
Standard shafts are used in captive motor designs. The antirotation and guidance is realized in the motor.
For long stroke version non-captive pass through shafts are used. Here the user needs to ensure antirotation as well as guidance (max. 0,2° deviation from axis).
Please refer to the individual size specification pages for product approvals
The Saia® linear synchronous motors are particularly ideal for any application where direct linear movement is required. Their constant force over a long stroke makes it also possible to replace bigger solenoids by smaller motors when higher starting forces are requested. Their long life and high reliability are definite advantages in applications involving:
ZIP: Some files need to be unzipped. Unzip utilities available for download for Windows / Macintosh.
For technical difficulties with this page contact us here.
